The
Spray Shield allows weed control in a neat strip along and under
plant rows. The spray shield can be connected to a knapsack sprayer
or a pressurised spray system. Mounted on wheels, it is easily
pushed along, lifting the plants out of the way as it goes. A
wide angle spray nozzle applies weed sprays while the spray shield
protects the plants. Can be used over weed matting or direct on
the ground.
SPRAYER
Used
for spraying rows of bushy plants. It has 3 wide-angle spray nozzels
to give total coverage of the plants. It can be pushed along and
a knap sack sprayer used, or towed with an ATV and a motorised
spray pump used.
The
drawbar is adjustable for in-line or offset use and the sprayer
has two height settings.
Specification:-
Height
under nozzel 640/740mm
Width
between nozzels - 1080mm
Overall
width - 1450mm
Draw
bar length - 1060 to 1860
Bare
hose length - 3160mm
PLANT
LIFTER
The
Plant Lifter lifts the plants out of the road allowing grass to
be mown under the plants without damaging them. It is specifically
manufactured to fit ride-on lawnmowers.
A
simple knob raises or lowers the lifter (see below) and two pins
allow easy fitting or removal. Can be used over weed matting or
direct on the ground.
The
Hydraulic Cutter Bar (HH-HCB) can be used for hedge trimming,
herb harvesting or pruning duties. It is supplied with a Breakaway
and is ready for mounting.
A
front end loader mount could be used for hedge trimming or a fixed
frame for other operations. Light duty and heavy duty versions
are available.
SALAD
TRAY CUTTER
The
Salad Tray Cutter is designed for factory processing of trays
of various plants. The model shown is electrically driven and
has a manual conveyor which moves the plant trays past the cutter
bar. This has adjustable height, cuts and blows the cuttings up
a chute and into vege bins.
HT-ONION
This
was an experimental machine. Unfortunately we could not get the
results required and we abandoned the project. However it does
demonstrate how Jenquip is proactive in researching new applications
and finding answers to customer problems.
If
you have a special application or problem, please ask us if we
can help.
HT-SEED
Another
example of a research project. In this case it is a specialty
seed collection.
Back
The
Spray Shield allows weed control in a neat strip along and under
plant rows. The spray shield can be connected to a knapsack sprayer
or a pressurised spray system. Mounted on wheels, it is easily
pushed along, lifting the plants out of the way as it goes. A
wide angle spray nozzle applies weed sprays while the spray shield
protects the plants. Can be used over weed matting or direct on
the ground.
Used
for spraying rows of bushy plants. It has 3 wide-angle spray nozzels
to give total coverage of the plants. It can be pushed along and
a knap sack sprayer used, or towed with an ATV and a motorised
spray pump used.
The
Plant Lifter lifts the plants out of the road allowing grass to
be mown under the plants without damaging them. It is specifically
manufactured to fit ride-on lawnmowers. 
The
Salad Tray Cutter is designed for factory processing of trays
of various plants. The model shown is electrically driven and
has a manual conveyor which moves the plant trays past the cutter
bar. This has adjustable height, cuts and blows the cuttings up
a chute and into vege bins. 
This
was an experimental machine. Unfortunately we could not get the
results required and we abandoned the project. However it does
demonstrate how Jenquip is proactive in researching new applications
and finding answers to customer problems.
Another
example of a research project. In this case it is a specialty
seed collection.